RE: [DML] Reverse grinding
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Reverse grinding




Perhaps the carpet or floor mat is not allowing the clutch pedal to be fully
depressed.

Scott Mueller 002981


-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of
Warren Wallingford
Sent: Friday, April 22, 2005 9:39 AM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] Reverse grinding




You're right.  I posted too quickly.  The opposite would have to happen-that
is, the step would have to be higher than spec to cause the problem.  I'm
always leary of Delorean-dumb shops who re-surface the flywheel "just
because".  I've known a couple of instances where the flywheel was milled
flat and the car wouldn't move.  My reaction was instinctive, not
thoughtful.

You're also surely right about them buggering the cross-gate .  Makes you
wonder if they disconnected it at all.

Warren at DMC


----- Original Message ----- 
From: "Martin Gutkowski" <martin@xxxxxxxxxxxxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Friday, April 22, 2005 5:46 AM
Subject: Re: [DML] Reverse grinding


>
>
> Hi Warren
>
> I can change a clutch, but I do like to learn when I read something 
> new! Why will knocking a fraction off the friction surface make that 
> kind of difference? Surely it'll have the opposite effect of making 
> the clutch slip rather than having it bite all the time? I'm sure I'm 
> missing something here- I've really enjoyed reading your posts lately 
> BTW :-)
>
> Personally I reckon they're buggered up the crossgate cable adjustment 
> when pulling the gearbox out. It's the easiest way to get the box out






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated