[DML] Replacing Brake Master Cylinder

["eremhcel" <dmcfive0@xxxxxxx>]

I need to replace my master cylinder. I have the nuts removed that hold 
it to the brake booster and the lines removed but it won't break free 
from the booster. Could I get a thin putty knife and try to separate it 
or is there something else holding it on there? After reading Steve's 
posts about the brake parts he replaced and the responses he got about 
bleeding, I thought I could just replace it and hook up the lines and 
then bleed them. But I saw some posts about bench bleeding the master 
cylinder. How do I do that? Thanks for any help.
Mike
5623








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/