[DML] Re: Can't get door open

["David Teitelbaum" <jtrealty@xxxxxxxxxxx>]

The easiest thing to do (what to try first) would be to make sure the
door is unlocked and then make sure it is cpmpletly closed. You may
have to push it to make sure. If that doesn't work then you have to
remove the trim panels and pull on the linkage inside to get it open.
There have been posts in the past on exactly what to push and pull. In
any case be careful, there are a lot of sharp edges inside the door on
which to cut yourself. After you get it open you should go over all of
the door adjustments and anchor pins. Do this on level, flat ground.
David Teitelbaum
vin 10757


--- In dmcnews@xxxxxxxxxxxxxxx, Woody <BePositive2000@xxxx> wrote:
> 
> I'm sure there has been one or several posts on this, but could not
> find one.  
> 
> My driver's side door has decided to only partially unlatch.  How do I
> get it to open and prevent it from happening again.  This occurred
> after I locked the door.
> 
> Thanks,
> 
> Woody
> 
> 
> 		
> __________________________________ 
> Do you Yahoo!? 
> Yahoo! Small Business - Try our new resources site!
> http://smallbusiness.yahoo.com/resources/








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/