[DML] Engine Support Questions
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Engine Support Questions




List:

I have been looking at a DeLorean and have noticed that the owner recently had some extra support pieces welded onto both sides of the main engine support member.  Is it fairly normal for this support to weaken over time and require extra bracing?  It looked like the job was done well and was covered up with a coating to protect the new metal.  The owner said this was just a precautionary measure and not a result of the support actually breaking.  I put a few photos of the area up in the following links...

http://www.rit.edu/~tan5732/delorean/support1.JPG
http://www.rit.edu/~tan5732/delorean/support2.JPG
http://www.rit.edu/~tan5732/delorean/support3.JPG

There are only two pieces welded on, theses are just a few different angles of them.

I would greatly appreciate any help you could offer.

Thanks,
Todd


[Non-text portions of this message have been removed]






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated