RE: [DML] delorean turbo question

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

I have mentioned this before. The fuel distributor can be modified to
deliver more fuel under boost. We have done this several times on Porsche
with very good results.
John Hervey
www.specialtauto.com




-----Original Message-----
From: Dick Ryan [mailto:deloreanbiker@xxxxxxxxx]
Sent: Saturday, February 26, 2005 8:22 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] delorean turbo question




Marc is pretty much on target here.  However, a couple
of comments may put a slightly different perspective
on this subject.

Rings:  Total Seal has rings for the D.  They have
them in "regular" and "forged" (for forced induction
engines).  With these rings you have almost zero
blow-by.  I have not installed them, but on the next
significant engine work I probably will.

Pistons:  Forged pistons in various compression ratios
are also available, per Don Steger at DeLorean Motor
Center.  He has built a "racing" PRV using forged
pistons with a 7 to 1 compression ratio to be used
with high pressure forced induction.

Fuel:  I suspect that this is what prompts Marc's
commenta about an engine management system.  More fuel
is desireable for the engine when boost is smployed.
The articles by Joe Kuchan in the recent Gullwing
magazine address this to a point.  More could be done,
of course, but these changes are not cost prohibitive.

Dick Ryan
VIN 16867
--- Marc Levy <malevy_nj@xxxxxxxxx> wrote:

> To do turbo's correctly, you would need a full
> engine
> rebuild using turbo-parts (Pistons and rings are the
> biggest problem).  I would also suggest a electronic
> engine management system that is turbo-aware to get
> optimum performance and reliability...



__________________________________
Do you Yahoo!?
Yahoo! Mail - Helps protect you from nasty viruses.
http://promotions.yahoo.com/new_mail





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links













To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/