Re: [DML] Alignment problems? Date: Thu, 23 May 2002 11:01:32 -0400

["James" <tomciodmc@xxxx>]

Hi
Here's the alligment info I have for the DeLorean.
FRONT - spec. - tol. (degrees)
left camber -0.25 0.25
right camber -0.25 0.25
left caster 3.75 0.25
right caster 3.75 0.25
total toe 0.48 0.08

REAR
camber -0.50 0.25
total toe 0.48 0.08

Your front alligment is 0.00 on both sides while it should be 0.20 to 0.24
on each side. It means that you will be wearing out the outside portion of
your front tires. Rear is off as well and since it's different on each side
you might get some pulling to one side especially on uneven roads. Actually
the rear might drift to the right. I would get the alligment done one more
time on ALL four wheels before going to Memphis - it's a looong drive. FYI
only TOE is adjustable on DeLorean.

Hope this helps
Tom Niemczewski
tomciodmc@xxxx
VIN 6298 (FOR SALE)


----- Original Message -----
From: <Delorean17@xxxx>


> CASTER-FRONT
> BEFORE-Left 5.2 degrees, AFTER 4.4 degrees
> BEFORE-right 5.0 degrees. AFTER 4.3 degrees
>
> CAMBER-FRONT
> Left ,0.3 AFTER 0.3
> right,-0.05 AFTER -0.05
> TOE:FRONT
> RIGHT, -0.15, AFTER 0.00
> LEFT-0.25 degrees AFTER 0.00
>
> REAR-CAMBER
> CAMBER=left, -1.6 NOT CHANGED
> CAMBER=right, -1.4 NOT CHANGED
> TOE-left, -0.60 degrees NOT CHANGED
> TOE-right. 0.35 NOT CHANGED
>