Re: [DML] Schematic for fan/relay
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Schematic for fan/relay



It appears from your request that you are not very familiar with the
DeLorean cooling fan circuit. Several years ago I wrote an extensive article
on this subject and it appears that it vanished when we moved our web site
to a new server. I'll try to explain in as few words as possible.

All DeLoreans were equipped with a cooling fan control circuit module called
the Fan Fail Module. Its main function was to illuminate the console mounted
Fan Fail warning lamp to alert the driver that one or both of the cooling
fans were drawing excessive current.

The wiring design called for both cooling fans to receive their power from
the Fan Fail Module. Shortly after production began dealerships and owners
were
reporting complete cooling fan failure. I
t didn't take long before it was
discovered that the Fan Fail module contained components that could not
handle the very high amperage drawn by the cooling fans. The result was Fan
Fail Modules were melting in their sockets which in turn rendered the fans
inoperative. Its like having a fire extinguisher filled with gasoline.

So what resulted were DeLoreans that would overheat with no warning to the
driver. Several of these incidents resulted in permanent engine damage. As
these reports increased the factory issued a modification that completely
eliminated the Fan Fail Module. This left the driver with only the
temperature gauge to warn of an impending overheat problem.

FanZilla to the rescue! This wonderful device created by Bob Zilla and
marketed by PJ Grady and DeLorean Services solved all of the module failure
problems and additionally made the entire cooling fan system more efficient
and extremely reliable.

Getting back to your post the fans should normally cycle depending on
weather or not the engine temperature or AC is calling for their assistance.
Rather than asking your mechanic to modify your cooling fan circuit you
should just purchase the FanZilla and plug it in yourself and save the labor
charge.

There is a less expensive solution called the Fan Fix from Special T
Automotive and although it does not have a fan sequencing circuit it will
greatly improve the reliability of the cooling fan circuit.

If you are still interested on the cooling fan circuit wiring diagram you
will find it at M:18:10 in your workshop manual. No circuit information was
ever published for the Fan Fail Module.

This is probably the longest message I have ever posted to the list, and I
hope
it's the last, (very long that is.)

DMC Joe/Help Club dmchelp@xxxx
Information & Store http://shopping.oraclesmallbusiness.com/dsvstore
DeLorean Website Directory www.dmc.tv

----- Original Message -----
From: <RJRavalli@xxxx>
Subject: [DML] Schematic for fan/relay
> I am looking to have my mechanic replace my water pump and set the fan to
cycle instead of staying on constantly. Which DeLorean manual should I get
for him to have if he is going to be checking and dealing with the fan
relay? I would rather him do this properly instead of messing around and
doing something else to give me headaches in the future.
>
> Thanks for any advice,
>
> Richard





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated