Re: [DML] Automatic interior light

["Ryan Foster" <westiething@xxxx>]

Kevin,
I had the problem with my interior light only working in the off and on 
position. I would not work with the doors. So I pulled the light out of the 
celing. and tested it and I found that the little brass roller on the lense 
wasn't touching the tab connected to the wire that operates the door light, 
when the light comes on with the door. you can bend the tabs to work or buy 
a new light. It is about 30.00 for a new one.
They are made of plastic, and mine had heated you a few time and was warped. 
That is why it did not work. Disconnecting the door buzzer will not affect 
the interior lights. I have my door buzzer disconnected too. Good luck.
Ryan- vin.#16301

> From: "Kevin Abato" <delorean@xxxx>
> Reply-To: dmcnews@xxxxxxxxxxxxxxx
> To: "Dmcnews \(E-mail\)" <dmcnews@xxxxxxxxxxxxxxx>
> Subject: [DML] Automatic interior light
> Date: Fri, 29 Jun 2001 23:03:46 -0400
>
> My interior light does not go on in the car when I open the doors. Was 
> this
> the way the car was designed? I disconnected my door buzzer, so if this is
> what causes this issue, let me know and I will crawl back under a rock.
>
> If not, is there any way to rig the light to work this way?