Re: [DML] Vinyl Door molding

["Payne" <bpayne@xxxx>]

I bought a couple of replacement rubstrips recently, and I guess the
adhesive backing was old or defective and wouldn't stick. I couldn't even
pull the backing off, I ended up removing the old tape completely. I got
some double sided sticky tape from 3M that worked perfectly, it was almost
the perfect width too. You should be able to find it at automotive stores,
it's a roll of red backed tape, and the stuff itself is actually a light
gray very thin foam strip. It holds to the stainless quite firmly but can
be removed if needed.

If your'e having trouble finding the stuff let me know and I'll see if I can
locate some.

payne
bpayne(at)macnet.com


>One question heasked,was whether I knew HOW that side door body molding is >fastened. Is it cemented to the stainless, as we both suspect or are there >bolts or fasteners of some sort. How is it removed and can it be recemented
>back on? >
> Thanks.
>
> Murray Fisher
> Vin: 05962 Lic: DMC-XII
> Washington State