Re: [DML] Starting trouble, any ideas?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Starting trouble, any ideas?



Jay, How long has it been sitting or not running, could be something as 
simple as needing gas or new gas or gas lines stopped up. Look for the most 
obvious. An easy way to see if it's getting gas would be to take the two 
phillips screws out of the cold start valve, lift it out and see if it's 
squirting gas when you try to crank it. Once your sure it's not gas then it's 
time to go to the ignition coil and while a friend cranks on the car see if 
it's getting fire from the distributor to the coil, then check the plugs for 
fire. If they are getting fire then pull the plugs and see if they are 
fouled. This is where I would start. There are several other things that will 
keep the car from starting but this is what I do 1st. 
John Hervey
www.specialTauto.com
11004,6935,6568






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated