[DML] Auto. Trans Problem

[dmcdelorean2@xxxx]

Hi,

Last month I posted my problem with my automatic transmission. It 
turns out that no trans fluid was getting in, therefore none of the rings and 
clutches in the tranny were being lubricated and burnt. Anyways, the 
transmission was rebuilt and put in. Now heres my new problem, the fluid 
pressure is set to 8 bars, everytime I do the test for the transmission fluid 
that is recommended in the DMC Work book, which is reving your engine up to 
2500 RPMs in drive, everytime I do that, it goes up to 8 bars then drops to 2 
bars. The clutches are slipping, the engine revs up to like 3000 RPMs and I 
only go 10 mph, I press the gas and I go really slow. I think that something 
is wrong with the valve body. Thats just my opinion. Anyone have any ideas of 
whats the problem?

Thanks,
Chris
Rahway, NJ
11388


[Non-text portions of this message have been removed]