RE: [DML] Installing Trip Reset Shaft

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Patrick, I fixed mine with a small piece of black heat shrink tubing and a
little glue.
John Hervey
www.specialtauto.com





-----Original Message-----
From: p12c16 [mailto:PRC1216@xxxxxxx]
Sent: Tuesday, October 19, 2004 3:22 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Installing Trip Reset Shaft





Well I finally broke down and bought the DMCH trip reset shaft and all parts
needed to
install it.  Mine had been broken off since I bought the car, and I never
really saw the need
to fix it.  I was wondering if there are any instructions out there as to
how to replace it?
Getting the binacle and gauges off is no problem, but I was wondering if
anyone else has
replaced this shaft before?  I am sure I could figure it out, but I want to
know if there are
any tricky steps, because I would hate to break something else inside the
speedo.

Thanks,
Patrick
1880








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links













To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/