Re: [DML] Door Latch Adjustment
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Door Latch Adjustment



Given your description here's what I would try. Cut a 2X4 to support the front of the door and pull down on the back of the door very gently. IF this appears to make a positive difference, however slight, continue. Very small positive tweaks are the way to go rather than trying to do it all at once. Also, the 2X4 should be against a "meaty" part of the door, not the lip.
 
Chris

EJ Chambers <marmieej@xxxxxxxxx> wrote:
I am in the process of trying to adjust my door latches. To note, I
have also recently replaced all my door seals (per the previous
discusison) I have successfully adjusted the passenger door so that
the latch pins line up directly with the door latch.

On the flip side, I cannot adjust the driver pins enough so that I
have the same result. The front latch pin appears to be knocking up
against the fiberglass body so that I cannot adjust it further. The
rear latch pin lines up correctly.

Also, I it is my belief, along with others who have been helping me,
that the driver door at some point in time was, for lack of a better
word, "tweaked". Reason for this belief is the front bottom part of
the door is curved in more than it should be; hence not aligning up
with the fender panel when closed.

Our current assessment is that the door must have had a good "knock"
when in the open position or in the process of opening, causing a bend
in the lower front door and possibly mis-aligning the door just a tad,
so that I cannot compensate it by adjusting the latch pins alone.

So, does this sounds any what plausible? Can a door become
mis-aligned? Is there a way to re-align the door with the door
attached to the car? Is there a way I can adjust the latch pins even
more? It would not take much of an change in how the door is bolted to
the car. Of course, my first thought that comes to mind when thinking
about this is the torsion bar.

Does anyone have insight, advice, idea, anything to help out? All help
is greatly appreciated.

Thanks in advance!!
Ej
4475





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links






__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

[Non-text portions of this message have been removed]




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated