Re: [DML] Tail-light circuit boards - soldering ok?

["Hank" <henry@xxxxxxxxxxxxx>]

> But I was wondering, is it ok to  just put a drop of solder next to each of the rivets?  

 Oh yeah, that's exactly what I did INSTEAD of the RS screw/nut job, and it works very well.  I did use a larger soldering gun (rather than a pencil) to make sure the socket and the board got hot enough to make the solder flow well.  I also added some solder to the center of the bulb socket to make a better connection to the bulb itself.

-Hank

[Non-text portions of this message have been removed]




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/