[DML] Re: Hood won't pop up

["Dave Swingle" <swingle@xxxxxxxxxxx>]

If I recall correctly, at least one of the vendors (DMCH) has a 
replacment spring for the trunk lid latch that is quite a bit 
stronger than the original. This pops the hood up quite nicely, and I 
think it was a couple bucks at most. 

Dave Swingle


--- In dmcnews@xxxxxxxxxxxxxxx, "David Teitelbaum" <jtrealty@xxxx> 
wrote:

 The height is also set by the
> latch so run the bonnet stops down so they don't interfere when
> adjusting the latch. Once you have the height set with the latch run
> the bonnet stops up so they push SLIGHTLY against the bonnet. This
> keeps the corners from flapping while you drive. Once you set the
> bonnet stops check that the restraining brackets line up with them 




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/