[DML] Re: Compatible Key blank
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Compatible Key blank



You should be careful in crossrefing the blanks. All blanks are not
created equal. Some are made from very soft pot metal and will wear
out quickly. Brass is good and nickel-silver is best. Just remember if
the key wears the locks won't and vice versa. Also a soft key is easy
to break off.
David Teitelbaum
vin 10757

--- In dmcnews@xxxxxxxxxxxxxxx, "gzapf" <gzapf@xxxx> wrote:
> For everyone's cross reference parts lists:
> 
> I just had a successful key copy made at Home Depot on an Axxess+ #38
> blank.  This was an ignition / later door key.  Axxess+ seems to be
> the popular brand at most key copy kiosks at hardware / misc stores.




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated