[DML] DMCH on/off switch

[Tom Watkins <dmctom@xxxxxxxxxxxxx>]

I have a question for anyone who has bought these from DMCH.  The 
on/off switches have 3 prongs on it.  I was going to use this as an 
in-line on/off switch for my installed flux capacitor that I bought. 
Can I use this switch with only 2 wires?  If so, which prongs would be 
the ones to use?  I assume one is a ground but I would not need it as 
the unit will be grounded to the battery.

This would be the same situation with the other switch as it will be 
used as a manual over-ride for my automatic antenna.  My radio doesn't 
lower the antenna when listening to CD's so I have a switch hidden under 
the drivers knee pad.  This is a auto parts store 2 prong switch.  I want to replace it 
with the DMC switch so I don't have to fumble around looking for it.

Yes, I did ask DMCH, Warren wasn't sure which prongs were which so I
figured I'd ask any of our resident experts out there.

Thanks

Tom
#05732







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/