RE: [DML] Throttle body

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Jon,
I'm rebuilding a complete fuel injection system as we speak.( off the car ).
I have also found that the micro switch is so hard to push down that the
idle screw ( lower ) can't or won't rest on the plate thus running the idle
higher. I will replace the micro switch to relieve the pressure of holding
the throttle open. Make sure the spring is pulling back properly with no
binds and the spindle likewise. Make sure the cable is not binding. WD40 is
good to get in tight places while your working the mechanism back and
fourth.
John Hervey
www.specialTauto.co


-----Original Message-----
From: doki_pen [mailto:doki_pen@xxxxxxxxx]
Sent: Wednesday, February 25, 2004 9:08 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Throttle body


Hi everyone

My car tends to idle fast, however if I push on the throttle lever
on the throttle body the idle drops down some.  Do you think it may
be time to rebuild it?  Or maybe there's a spring adjustment on it
or something.

Thanks!

Jon




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links









To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/