Re: [doc] missing o-ring and clip helpppppppppppppppp!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [doc] missing o-ring and clip helpppppppppppppppp!



    thanks Mike i love you, il even treat it to a new fuel guage whil 
im at it. To be honest i didnt think you could get the parts....... 
will miracles never cease, thanks for your help  cheers tony

--- In doc-uk@xxxxxxxxxxxxxxx, "Mike Bosworth" <mike.bosworth@...> 
wrote:
>
> Tony
> 
> In case you are feeling flush these are the 2 bits, DMCH has them 
in 
> stock.... Might be a better solution for you in the long run :)
> 
> 
> Item 7 102294 CUP, SEAL 1 $1.78  
> Item 8 102293 SEAL,O RING 1 $2.66  
> 
> Regards
> 
> Mike
> #2001 HEC6T
> 403
> 
> 
> --- In doc-uk@xxxxxxxxxxxxxxx, "essexdick" <tny1964@> wrote:
> >
> >     cheers Nick, i have the o-ring, but its the retaining ring iv 
> > lost for it,if i had a piece of alloy tube tigged with a piece of 
> > pipe the right size, would this obstruct anything as im a bit fed 
> up 
> > trying to get the pipe back in everytime the timing needs 
> setting?   
> >      cheers tony  ps i think its been out a while ie since Lotus
> > 
> > --- In doc-uk@xxxxxxxxxxxxxxx, Nick Tomlinson 
> > <nickandkathryntomlinson@> wrote:
> > >
> > > buy a new one?
> > >   it might have gone under the inlet manifold, oooh
> > >   if it is still you could try a long reach magnetic pickup 
> around 
> > there and hope it clicks.
> > >    
> > >   NickT.
> > >    
> > >   p.s. if you are desperate then good old silicon sealant 
> globbed 
> > round the end of the brass tube could be a temporary solution.
> > > 
> > > essexdick <tny1964@> wrote:
> > >           Hi everyone, im in a little bit of bother, the pipe 
> from 
> > the idle 
> > > motor which goes just in front of the ditributor into the main 
> > body, 
> > > well the o-ring and clip have vanished. I have looked 
> everywhere, 
> > in 
> > > the valley of death, chassis,every orifice underneath the car 
as 
> > well.
> > > Does anyone have any suggestions of what i can do,to sort this 
> > problem 
> > > out.. yours in hope Tony TT
> > > 
> > > 
> > > 
> > >          
> > > 
> > >  		
> > > ---------------------------------
> > >  Try the all-new Yahoo! Mail . "The New Version is radically 
> easier 
> > to use" ? The Wall Street Journal
> > > 
> > > [Non-text portions of this message have been removed]
> > >
> >
>







------------------------ Yahoo! Groups Sponsor --------------------~--> 
Something is new at Yahoo! Groups.  Check out the enhanced email design.
http://us.click.yahoo.com/SISQkA/gOaOAA/yQLSAA/HliolB/TM
--------------------------------------------------------------------~-> 

DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/doc-uk/

<*> To unsubscribe from this group, send an email to:
    doc-uk-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated