Re: [doc] re-fitting rear speaker panels

[Daniel Shane <dan@xxxxxxxxxxxxxx>]

Chris

The only problem with impact adhesive is the next time you come to remove
the panel you will rip them.

The vinyl will go back with the heat gun.  Just heat the vinyl until
pliable, bend it over the edge of the door surround and let it cool.  Hold
it in place whilst it cools if you want with a cloths peg.

Dan


On 16/5/06 08:47, "Richard Hutchinson" <dickyh11@xxxxxxxxxxx> wrote:

> You should, of course, test whatever glue you use on a small area to
> make sure it doesn't affect the trim :)
> 
> Rich H
> DOC 365 VIN 1274
> 
> 
>> -----Original Message-----
>> From: doc-uk@xxxxxxxxxxxxxxx [mailto:doc-uk@xxxxxxxxxxxxxxx] On Behalf
> Of
>> Richard Hutchinson
>> Sent: 16 May 2006 08:37
>> To: doc-uk@xxxxxxxxxxxxxxx
>> Subject: RE: [doc] re-fitting rear speaker panels
>> 
>> Use an impact adhesive like Evo-stick. Spread on both surfaces, allow
> to
>> tack dry, then press together
>> 
>> The heat gun won't affect it that much although it might dry a little
>> more quickly
>> 
>> Rich H
>> DOC 365 VIN 1274
>> 




------------------------ Yahoo! Groups Sponsor --------------------~--> 
Home is just a click away.? Make Yahoo! your home page now.
http://us.click.yahoo.com/DHchtC/3FxNAA/yQLSAA/HliolB/TM
--------------------------------------------------------------------~-> 

DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/doc-uk/

<*> To unsubscribe from this group, send an email to:
    doc-uk-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/