[doc] more help needed for column bush!! sorry

["blackaddertoo" <blackaddertoo@xxxxxxxxxxx>]

Hi all

have not had time for a couple of weeks but now back on the case!.

i have now removed the whole column!, including collapsable part.

so i am left with a hollow rod sticking about a foot from the pedal 
box (lower column?)

Now have tried pulling on this by hand, but the splines the other 
side are a bit rusty, and grip is a bit difficult. so its stuck for 
now.

if i slide the shaft back on, when you tighten the adjust know, does 
it grip the lower shaft?
or what is the best way to remove the lower shaft?.

also the bushing, it has a straight hole, but obviously the column 
is angled. does it just adjust to its own angle? so put shaft 
through back on straight, then tilt up and fix the two bolts?.

thanx for any help any one can give.

Regards

Steve
vin 1621






------------------------ Yahoo! Groups Sponsor --------------------~--> 
You can search right from your browser? It's easy and it's free.  See how.
http://us.click.yahoo.com/_7bhrC/NGxNAA/yQLSAA/HliolB/TM
--------------------------------------------------------------------~-> 

DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/doc-uk/

<*> To unsubscribe from this group, send an email to:
    doc-uk-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/