Re: [doc] radio upgrade
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [doc] radio upgrade



Chris,

Just get yourself a standard ISO lead from somewhere like halfords and wire
it up.  Make a new 12 volt and ground directly from the battery and run new
wires to the speakers.  Not to hard to do.

Don't forget that the standard wiring for the speakers share the ground
between all the speakers and modern stereos and speakers wont work correctly
like that.

Dan


On 3/5/06 22:43, "Chris Hawes" <chris@xxxxxxxxxxxxxxxxxx> wrote:

> I am about to replace my Craig stereo with an Alpine unit.  Is there a
> particular harness/adapter that will plug onto the old harness for
> compatibility?
> 
>  
> 
> I saw the link 8056143365 for ebay, but I have no intention in going back to
> the original system.
> 
>  
> 
> Thanks in advance
> 
>  
> 
> Chris
> 
> Vin 5255
> 




DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/doc-uk/

<*> To unsubscribe from this group, send an email to:
    doc-uk-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated