Re: [doc] steering bushing, which method?

["blackaddertoo" <blackaddertoo@xxxxxxxxxxx>]

thanx Martin

just undo the two big bolts then and slide the column up a bit?

have already undone the pinch bolt and plenty of release oil.

i did buy the bushing from you a while ago.

this is one job i'll be glad to get done.

Regards

Steve
vi 1621



--- In doc-uk@xxxxxxxxxxxxxxx, Martin Gutkowski - DMC Ltd 
<martin@...> wrote:
>
> The way to do it properly is to remove the column
> 
> >with this method do i need to remove the binnacle or column 
switch gear
> >(so far removed knee pad)
> >
> No. Switch gear is part of the column. It will need to be 
unplugged but 
> that's it.
> 
> Martin
>







DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/doc-uk/

<*> To unsubscribe from this group, send an email to:
    doc-uk-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/