RE: [doc] rear springs.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [doc] rear springs.



> Just a thought John, once you have made your decision on ride height,
> and tightened up the clamps, I think you are fully committed to that
> height, as it grips very hard on the body of the shocker.  Go get it
> right first! 

That only applies to the shock set the Mid State club sell, both DMCH and DMC rear shockers have a threaded body so it's possible to change the ride height at a later stage.

Regards

Chris




DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine ** 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/doc-uk/

<*> To unsubscribe from this group, send an email to:
    doc-uk-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated