[doc] Re: Torque settings
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[doc] Re: Torque settings



Hi Paul

Recently done this 'little task' so its still fresh to me.... 55 FT
Pounds  (75 Nm) Trailing arm to pivot bush

Just make sure that you put the same number of shims back in as you
took out on both sides and torque the TA bolts back up with the
weight of the car on the suspension as so not to preload the bolt.

How are you going to do this job on a garage ramp / pit i hope, did
mine over a pit and its still a pig of a job...

I have a few pics etc of the procedure if you would like them?

I am in the process of writing a little 'how to' on this one as like
NickT, work gets in the way of play times.

Hope you have a manual rather than an auto :)

Kind Regards

Mike
#2001 New radio nearly fitted ....goodbye Craig....
doc 403


--- In doc-uk@xxxxxxxxxxxxxxx, "Paul" <willinot@...> wrote:
>

>
> I have just bought a set of bolts to replace my existing trailing
arm bolts.
> The rating on them is 12.9 instead of the original 10.9.  What is
the Torque
> setting I need to use for these?  Is it the same as the original?
>

>
> Thanks
>

>
> Paul (162) Belfast
>
> 2493
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 267.15.10/263 - Release Date:
16/02/2006
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.375 / Virus Database: 267.15.11/264 - Release Date:
17/02/2006

>
>
> [Non-text portions of this message have been removed]
>






DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **




SPONSORED LINKS
Recreation Automotive Sports
Delorean part Delorean cadillac


YAHOO! GROUPS LINKS






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated