[doc] re plunger in distributor

["blackaddertoo" <blackaddertoo@xxxxxxxxxxx>]

Hi all

does anyone know, does the plunger in the distributer drop down onto 
the pivot arm on by gravity or by fuel pressure?

i have soaked mine in acetone, reassembled but when a move the air 
intake plate i can hear/feel the pivot touching the plunger ie it is 
not dropping down fully.

does it need fuel to lubricate as it is a very tight machined fit.

i did not touch the sides of it, just the tip as the groove in it is 
only .2mm? can just about see it.

i am about to re-assemble on the car but would be nice to know if it 
will function.

thanx for any help

regards

Steve
vin 1621
doc 370








DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

SPONSORED LINKS

Recreation	Automotive	Sports
Delorean part	Delorean cadillac

---

YAHOO! GROUPS LINKS

•  Visit your group "doc-uk" on the web.
   
•  To unsubscribe from this group, send an email to:
   doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---