Re: [doc] Re: thermo time switch part numbers

[Martin Gutkowski <martin@xxxxxxxxxxxxxx>]

The original is actually a VDO part but the connector is prone to 
breaking. The plug on the loom can be forced into the bosch plug

Martin

Mike Bosworth wrote:

> Hi Steve
>
> Its a Bosch 0280 130 214    ( DMC Part 102125 )As you prob know this
> part is only supposed to operate the cold start injector when the
> coolant temperature is below 35oC, after 5 mins of running the switch
> will not be closed due to the higher coolant temperature. BTW the
> switch itself is grounded by the threaded part that goes into the
> water pump, ie not a good idea to seal it in with PTFE tape as this
> may cause this not to work correctly. Use a multimeter at cold and
> then again after 5 mins to confirm the correct operation of this
> switch and save yourself £20 :)
>
> Regards 
>
> Mike
> #2001
>







DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

---

YAHOO! GROUPS LINKS

•  Visit your group "doc-uk" on the web.
   
•  To unsubscribe from this group, send an email to:
   doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---