Re: [doc] help

[Martin Gutkowski <martin@xxxxxxxxxxxxxx>]

Hi Dan

It's really really easy if you take it off and do it on a pillar drill. 
10 or so 5mm M6 cap screws hold it down and the gasket is re-usable if 
you're careful

If you're worried, send it to me, I'll do it. I could even send you one 
that's already been done in exchange if you like. No charge - it's so 
easy. You will have to fiddle with the mixture screw on the exchange one 
to get it going though because it'll be different from yours.

The casting on the DeLorean engine was assembled so that you couldn't 
adjust the mixture. On the Volvo (065-type) intake plenum, there's a 
screw bunging it up

Martin

Daniel Howarth wrote:

> Has anyone ever drilled out the bung that sits in the thingy just 
> above the
> metering head mixture adjustment allen bolt. I've just been to see a chap
> that knows about the jet-tronic and he don't wanna touch it. So can 
> someone
> help me?   Dan vin4986 Elanor








DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

---

YAHOO! GROUPS LINKS

•  Visit your group "doc-uk" on the web.
   
•  To unsubscribe from this group, send an email to:
   doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---