Re: [doc] Bonnet/hood Locked, Cable Broke cannot get in - HELP!

[Martin Gutkowski <martin@xxxxxxxxxxxxxx>]

Just be really careful to cut ALL the frayed ends off at the handle end 
first before pulling the old one out otherwise some will get stuck 
inside and the new one won't go in.

But yes, I use stainless bike cable from Halfords, and recently changed 
out a throttle cable and kept the first metre of the old one from the 
pedal end for use in my car as the bonnet release!

Martin

Mike Bosworth wrote:

> -If you need to replace the actual cable a standard bike brake cable
> is all thats needed :) ....mine was off a bmx, just thread the cable
> through the existing external black sleeving..
>
> Regards
>
> Mike
> #2001/403
>



DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

---

YAHOO! GROUPS LINKS

•  Visit your group "doc-uk" on the web.
   
•  To unsubscribe from this group, send an email to:
   doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---