Re: [doc] 4-Pot Callipers for the DeLorean
    
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [doc] 4-Pot Callipers for the DeLorean
- From: Martin Gutkowski <webmaster@xxxx>
 
- Date: Tue, 11 Mar 2003 18:28:14 +0000
 
If you brake hard enough with the stock setup it's the fronts that lock 
up furst. Improving the bite on the front will only make it happen 
sooner. I have a source of Kevlar pads for the D which I'm waiting to try...
hehehehehe Mark owned a Capri..... Anyone remember the difference 
between a hedgehog and a Capri?
Martin
jamesrguk wrote:
Hi All, 
I was checking out where to get service kits for my DeLorean front 
brake callipers and found out some information from a freind about 
Ford Capri callipers that he thought would fit the DeLorean. 
They are 4-pot calipers and the mountings look dead ringers of the 
DeLorean 2-Pot callipers.
I have uploaded a photo to the photos section as 'a 4-pot calliper' 
(it's the caliper on the bottom right of the picture)
I wondered if anyone has ever done this upgrade? 
It seems that it would only involve changing the calliper and 
nothing else i.e. fairly simple job and completly reversable.
I take it that the 4-Pot callipers would significantly increase 
braking power, they also have vented discs.
Any comments??
Regards
James
 Back to the Home of PROJECT VIXEN