Re: [doc] Flared tailpipes
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [doc] Flared tailpipes



Chris - you're a star! I'll give you first refusal on the first batch :-)

Chris Parnham wrote:

> Martin,
>
> The external diameter is 65mm
> The top length is 190 mm
> The bottom length is 117 mm
>
> That should give the proper angle.
>
> They should be welded on (tacked) so that the old inner pipe is just level
> with the bottom bit.(117mm).
>
> Hope that's clear enough! The things I do for you boys, laying on my back
> under my cold car port, with my glasses on, torch in hand etc. etc.
>
> Arkwright!
>
> -----Original Message-----
> From: Martin Gutkowski [mailto:webmaster@xxxx]
> Sent: 13 March 2002 09:43
> To: doc-uk@xxxxxxxxxxxxxxx
> Subject: [doc] Flared tailpipes
>
> Hiya
>
> Can someone tell me the outside diameter of the '83 flated exhaust tips
> please? I know a tubesmith quite well and would like them to make up
> some to fit the DeLorean - I dislike my "pea-shooters".
>
> Is the cut on the flaring 45 degrees?
>
> Cheers
>
> Matin
>
> DOC UK Website: www.delorean.co.uk
> Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxx
> ** Unless otherwise stated, all messages posted to the group are assumed
> public and may be printed in the club magazine **
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
> DOC UK Website: www.delorean.co.uk
> Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxx
> ** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated