RE: [doc] Pulley Nut Help

["Richard" <dickyh11@xxxxxxxxxxx>]

I have been told that wedging a big spanner on the nut and turning the
engine on the starter can do the job. Obviously you have to prevent it
firing.

It sounds very risky to me since you have no real control. Plus if the
nut is in _that_ tight you're at risk of simply shearing it off. But as
a last resort.....

Having this job to look forward to myself, you're not exactly filling me
with confidence!   :(

Rich
DOC 365 VIN 1274


> -----Original Message-----
> From: nick12dmc [mailto:Tammyfew@xxxxxxx]
> Sent: 21 August 2004 5:22 PM
> To: doc-uk@xxxxxxxxxxxxxxx
> Subject: [doc] Pulley Nut Help
> 
> Hi All,
> Have been trying all day to remove the pulley nut! I have a air
> impact wrench and it still will not move.
> has anybody any more idears to get this "NUT" off.
> I need to get this sorted as I go on holiday towards the end of next
> week and need to get the heads into the Machine shop.
> Its not somthing silly like a left hand thread is it?
> 
> Had enough of said nut
> 
> Nick H
> Mem 164
> 
> 
> 
> ------------------------ Yahoo! Groups Sponsor
> 
> DOC UK Website: www.deloreans.co.uk
> Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> ** Unless otherwise stated, all messages posted to the group are
assumed
> public and may be printed in the club magazine **
> Yahoo! Groups Links
> 
> 
> 
> 



DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/doc-uk/
   
• To unsubscribe from this group, send an email to:
  doc-uk-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.