Re: [DML] I'm a colossal nitwit.

[Stephen Rice <stevedmc@xxxxxxxxx>]

If it is of any interest to you guys, we are also discussing alternators
over at DMCToday.

http://www.dmctoday.com/showthread.php?52-Best-Replacement-Alternator

-Steve Rice
#16510

On Mon, Jul 8, 2013 at 2:16 PM, Steelwings <steelwings@xxxxxxxxxxx> wrote:

> Do yourself a really big favor. Shit-can that Ducellier and get one of the
> big amp upgrades from DMC or John Hervey or Grady. That Deucy isn?t worth
> the trouble and it is likely the root of most of your problems in the first
> place. (That would also still be true if it was in perfect working
> condition as well so rebuilding it won?t help you.) They are worthless from
> the get-go.  Just way too weak for the job. Just my two cents worth.......
> Steelwings
>
> From: JP Hindin
> Sent: Monday, July 08, 2013 10:50 AM
> To: dmcnews@xxxxxxxxxxxxxxx
> Subject: [DML] I'm a colossal nitwit.
>
>
>
> So, first step in figuring out where my voltage was going (for the low
> voltage at the fuel pump and apparently alternater voltage not getting
> 'into' the car), I decided I was going to go on a cleaning binge and pop
> off all the terminals I could find (within reason) and start scrubbing
> things up to get some good contact and blob some dielectric grease.
>
> I started with the alternator, whose B+ terminal was quite badly rusted. I
> wire-brushed it, WD40d it, let it soak for a half hour, WD40d it again,
> and then promptly sheared the bugger.
>
> I have the original Ducellier alternator in it, and there's a guy local to
> here that rebuilds alternators, generators and magnetos, so I figured I'd
> pop it off and have him replace the stud. Here began a MASSIVE pain in the
> neck to pull it. The other bolts were easily undone, so no harm there, but
> I just COULD NOT remove the clip that goes into the brush module. I
> couldn't even figure out if I was supposed to pinch or pry apart. After
> literally dismantling the alternator under the car and removing the brush
> module entirely, I figured it out (the clip was slightly warped, which
> meant it required a massive amount of pressure to release)... but since I
> was under the car, holding the alternator up by one hand and in huge
> amounts of pain so the whole alternator wasn't hanging from the brush
> module clip wires... as I'd already undone it thinking I'd just flip it
> over and it would be "obvious" how to remove it and was carrying its full
> weight... well, it would be fair to say I was in a rush.
>
> I don't suppose someone could take a picture of the back of their
> alternator and post it so I can figure out where to mount the noise
> suppressing cap? I remember the ring connector goes around the B+, but I
> can't remember where its base mounted.
>
> Oh, and of course, AFTER removing it, I discovered that the B+ terminal
> has a pair of 1/4" shims on it - so I didn't need to remove the alternator
> at all, I could've just removed one of the shims and tidied up the sheared
> end. (At least this way I can clean the heck out of everything easily,
> but, wow, what a lesson).
>
> <groan>
>
> - JP
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> To address comments privately to the moderating team, please address:
> moderators@xxxxxxxxxxx
>
> For more info on the list, tech articles, cars for sale see
> www.dmcnews.com
>
> To search the archives or view files, log in at
> http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links
>
>
>
>


[Non-text portions of this message have been removed]



------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/