[DML] Re: "SOLVED" - She starts (painfully), she runs (mostly), she doesn't go anywhere...

["Welmoed" <welmoedj@xxxxxxxxx>]

There are three bolts holding the FD in it's place and ensure - with an O-ring - the connection to the mixture unit is air tight.

Welmoed.


--- In dmcnews@xxxxxxxxxxxxxxx, JP Hindin <jplist2008@...> wrote:
>
> 
> I had an epiphany on Friday night, after some dinking around, and charged
> the battery over Saturday. Sunday afternoon it fired right up and I was
> able to take the car out for a 45 minute drive.
> 
> The battery light was on for the whole drive. When I got home again I
> pulled out the voltmeter and checked voltage between the battery post on
> the passenger-side of the engine bay to one of the intake runners and got
> a consistent 12.5V.
> 
> So I crawled under the thing and measured the alternator, between the
> surprisingly rusty terminal (which I had to scrape to even get a read off
> it) and the engine block - 14.0V.
> 
> So it seems like the alternator is working, but the voltage isn't making
> it out to anywhere. While the crimping looked ok on the two ring
> connectors on the alternator post, it was pretty rusty, so I'm going to
> clean it up with some sandpaper and get some dielectric grease on it
> (seems to me like from its position under the car it really should have a
> boot over it, but apparently not) and see if that helps.
> 
> Anywhere else I should be looking?
> 
> Thanks again for everyone that suggested places to look.
> 
> OH! Before I forget, there are two bolts on the top of the fuel
> distributor, I think they -may- be mounting bolts. The one under the
> intake banjo is apparently completely undone on my car as it just rattles
> about (but the banjo holds it in). Is this just a mounting bolt?
> 
> Cheers!
> 
>  - JP
> 
> On Fri, 14 Jun 2013, JP Hindin wrote:
> 
> >
> > My DeLorean has a hot-start issue that I've not bothered dealing with yet,
> > so it usually only gets out for 30 minute runs out-and-back. Last time it
> > was on the road was probably December. Over the Iowa winter I'd fire it up
> > once a month, generally, a let it idle for ten minutes to get the moisture
> > out of the oil. I've been waiting for nice days in the summer, but it's
> > rained a LOT out here, so I haven't started it up in maybe three or four
> > months.
> >
> > Usually it's a bit of a pain to start. Lots of fire and die and then
> > eventually it'll settle into a clean idle and run like a champ.
> >
> > Yesterday I got in to take it out because it was finally a nice day and it
> > was a real bear to even get it to idle, and after at least five minutes of
> > crank-fire-and-die, it settled into an unusually lumpy idle, but ANY
> > throttle input would cause the engine revs to drop to the point of it
> > dying. As such, I was unable to actually go anywhere because the best it
> > could manage was an idle.
> >
> > Is this a common issue with the KJet that I've yet to come across in my
> > nine months of DeLorean ownership, or should I be concerned?
> >
> > Thanks all;
> >
> >  - JP
> > 50441
> >
> >
> >
> > ------------------------------------
> >
> > To address comments privately to the moderating team, please address:
> > moderators@...
> >
> > For more info on the list, tech articles, cars for sale see www.dmcnews.com
> >
> > To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links
> >
> >
> >
> >
>




------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/