Re: [DML] used frame?

[Martin Gutkowski <martin@xxxxxxxxxxxxxx>]

I'm in the process of rtestoring my 5th frame now. I get the epoxy 
professionally stripped either chemically (preferred) or in an oven 
(okay but leaves ash inside the enclosed sections). Then any welding is 
done and the frame galvanised and powder coated. Galvanising sees the 
flat sections get a little warped but the important dimensions of the 
frame remains good. Ed Uding has been galvanising frames for ages and 
AFAIK has never had a problem with warping.

Martin

On 28/06/2013 04:25, deloreanernst@xxxxxxx wrote:
> I'm moving toward redoing my frame. It might be easier to swap it out, if mine proves to be too rusty, after I get to see it naked. A new one is not in the budget. Any thoughts, anyone? Powdercoating? Cost? Whatever. Mine is for the manual tranny.
>
>
> -Wayne
> 11174
>



------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/