Re: [DML] Re: Carburetors suck.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Re: Carburetors suck.
- From: "Martin Gutkowski" <martin@xxxxxxxxxxxxxx>
- Date: Wed, 11 Apr 2012 20:07:58 +0000
A beautiful example of you deflecting that which defeats your own argument. Did you even read past the subject?
I'm not even sure you know *how* a carb works... Venturi effect? static versus total pressure? Surprise me....
Martin
Sent from my BlackBerry®
-----Original Message-----
From: "content22207" <brobertson@xxxxxxxxxxxx>
Sender: dmcnews@xxxxxxxxxxxxxxx
Date: Wed, 11 Apr 2012 19:59:19
To: <dmcnews@xxxxxxxxxxxxxxx>
Reply-To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Re: Carburetors suck.
Point of order: PRV's themselves suck. All a carburetor does is respond to that suction as it passes through.
Bill Robertson
#5939
--- In dmcnews@xxxxxxxxxxxxxxx, Marc Levy <malevy_nj@...> wrote:
>
> "All metering is accomplished by air flow alone"..
>
> Exactly the point Bill- What about air temperature? Air density? ignition timing? fuel quality? All moving targets that a carburetor had no way of compensating for.
>
> There is a reason complex fuel injection systems have come to replace the simple (and complex) carburetors of the past.
>
>
> --- On Wed, 4/11/12, content22207 <brobertson@...> wrote:
>
> > From: content22207 <brobertson@...>
> > Subject: [DML] Re: Carburete a DeLorean at DCS'12?
> > To: dmcnews@xxxxxxxxxxxxxxx
> > Date: Wednesday, April 11, 2012, 3:19 PM
> > Also FYI:
> >
> > Speaking for the Autolite/Motorcraft 2100 only:
> >
> > Unless the carburetor itself physically changes (gets
> > dropped & cracked, stagnant fuel turns to varnish
> > inside, jets are purposefully unscrewed and swapped out for
> > different sizes, etc) it will "hold its tune" into
> > perpetuity. Not counting the accelerator pump and the full
> > throttle enrichment valve -- which has been disabled on my
> > carb and Byrne Heninger's -- there are only two moving parts
> > in the entire metering circuit: the throttle plates
> > themselves. All metering is accomplished by air flow alone,
> > and the amount of fuel that leaves the bowl through the jets
> > in response to that air flow.
> >
> > Bill Robertson
> > #5939
>
------------------------------------
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links
------------------------------------
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/dmcnews/join
(Yahoo! ID required)
<*> To change settings via email:
dmcnews-digest@xxxxxxxxxxxxxxx
dmcnews-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN