[DML] Re: Warm up regulator readings
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Warm up regulator readings
- From: "Welmoed" <welmoedj@xxxxxxxxx>
- Date: Wed, 25 Aug 2010 15:25:06 -0000
You may want to compare them with the figures Bitsyncmaster collected and posted on DMCTalk.com
Welmoed.
--- In dmcnews@xxxxxxxxxxxxxxx, jordan rubin <nuttenschleuder@...> wrote:
>
> Hello,
>
>
> I have serviced my warm up regulator today. including cleaning dirty screen and ambient air pipe was clogged.
>
> I have the following data, wondering if someone could give it a once over.
> note: new fuel pump and boot along with tank cleaned out yesterday
>
> 1. heater voltage - good
> *** voltage when car is running
>
> 2. heater resistance - 18.7 ohms
> *** later testing shows slow and constant pressure rise on cold engine started to 3.8 bar upon plugging in.
>
> 3. rest pressure - good
> *** after running pump on cold engine from rpm relay, then shutting pump off
>
> 3.00 bar @ 8:39
> 2.75 bar @ 8:42
> 2.68 bar @ 8:49
> 2.55 bar @ 8:56
>
> 4. closed pressure
> **** with pump running, no engine, engine cold
> 70psi / 4.8 bar
>
> 5. open pressure
> **** with pump running, no engine, engine cold
> 36psi / 2.5 bar
>
> 6. open pressure warm engine running , no vacuum to WUR
> 3.7 bar
>
> 7. open pressure warm engine running 13.3hg through 16.2hg vacuum to WUR
> between 1.7 to 1.8 bar
>
> 8. vacuum delay valve test on delay valve from 16hg down to 8 hg
> 10 seconds
>
> any thoughts on this
>
> thanx
>
>
> Jordan Rubin
>
>
>
> "Cum catapultae proscriptae erunt tum soli proscript catapultas habebunt!!"
>
>
>
> http://www.mydelorean.net
>
> http://www.youtube.com/profile?user=jcrubin78
>
>
>
>
> [Non-text portions of this message have been removed]
>
------------------------------------
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/dmcnews/join
(Yahoo! ID required)
<*> To change settings via email:
dmcnews-digest@xxxxxxxxxxxxxxx
dmcnews-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN