[DML] Fuel distributer o-ring

[Dave Sontos <dsontos@xxxxxxxxxxx>]

I was also plagued by the broken o-ring in the fuel distributer. After close examination of the ports in the distributer where the o-ring sits I found the bolt for the frequency valve line. I removed the bolt and added two copper washers to the bolt so that it would not penetrate as deeply into the distributer. I have been running now for three weeks without any hot start problems. My theory is that the bolt may have been the culprit for damaging the o-ring because the copper washers may have been flattened over time and repeated use and allowed the bolt to enter into the path of the piston and o-ring. Give it a try.

Dave Sontos

Sent from my iPad


------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/