[DML] Re: stuck drivers door
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: stuck drivers door
- From: "David Teitelbaum" <jtrealty@xxxxxxxxxxxxx>
- Date: Fri, 27 Feb 2009 17:14:35 -0000
More likely the door was slammed because it is out-of-adjustment. That
bends the linkage inside the door eventually causing it to not be able
to fully release either or both of the latches. The "fix" is to remove
the interior trim while the door is shut (not easy) reaching in and
pulling on the links to unlock and then release the latches. Both
latches MUST be in the "second locking position" before trying to lock
the door. If you force the door to lock you WILL jam the door. Once
you get the door open you have to adjust the latching pins and go
through the whole adjustment procedure as per the Workshop Manual. Be
careful of all of the sharp edges inside the door, it will cut you up!
David Teitelbaum
vin 10757
--- In dmcnews@xxxxxxxxxxxxxxx, "welmoedj" <joe.dalton@...> wrote:
>
> --- In dmcnews@xxxxxxxxxxxxxxx, "skyang0011" <skyang0011@> wrote:
> >
> > it seems that the rear latch on the drivers door releases but the
> front
> > will not release.
>
> Probably the guide of the front lock rod that came off of the door's
> inner side. Happens often. Take of the upper door panel and look for a
> plastic clip (guide) about at the grab handle's position. You may also
> have to take the lower door panel off to have a clear view.
>
> Welmoed.
>
------------------------------------
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/dmcnews/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:dmcnews-digest@xxxxxxxxxxxxxxx
mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN