Re: [DML] Pulling Transmission

[Marc Levy <malevy_nj@xxxxxxxxx>]

17mm?   I don't think that is even possible!  They are
small, 10 or 11mm.

The bolts are almost impossible to see.  As I said,
you can feel them if you run your finger along the
front of the bell housing between the back of the
frame and the transmission.

I just swapped the trans this past weekend, so my
memory is very clear on this!!  :)


--- Steven Alves <steve@xxxxxxxxxx> wrote:

> Thanks, I received a few replies off list also and
> have located the side 
> cover. The bottom cover has me stumped. I found four
> bolts on the bottom but 
> they were 17mm and look like they connect the bell
> housing to the tranny. I 
> am guessing the ones I need to remove are somewhere
> above the bottom frame 
> crossover. I need to get a better look. Nothing like
> laying on your back 
> with jack stands holding the car up.
> 
> 
> Steve
> #2700
> 
> 
> ----- Original Message ----- 
> From: "Tom Neiland" <tneiland@xxxxxxxxxxx>
> To: <dmcnews@xxxxxxxxxxxxxxx>
> Sent: Sunday, May 25, 2008 7:20 PM
> Subject: RE: [DML] Pulling Transmission
> 
> 
> 
[mod snip]

------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/