Re: [DML] Second sensor on Waterpump?

[Martin Gutkowski <martin@xxxxxxxxxxxxxx>]

Some PRVs have a water takeoff where the D's temp gauge sender is. The 
hose barb unscrews (with some effort).

Martin

Tom Tait wrote:

>Nope, its the temp sensor that is supposed to go into the head at cyl. 1.  That head has a hose barb fitting that does not appear to be threaded in.  This makes me suspect that its not a delorean head?
>
>The wire that was plugged into the waterpump sensor is an estension of the lt. green wire that plugs onto the lamba sensor.  So for an unknown reason I have a modified head, or a stealthy hose barb in a standard head, and the temp sensor is now next to the tts.  Since its below the thermostat I'm guessing this isn't the worst location for it.
>
>Any thoughts?
>
>  
>



------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/