[DML] Fuel Pump Not Getting Voltage After RPM Relay Replaced
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Fuel Pump Not Getting Voltage After RPM Relay Replaced
- From: "davvet2" <davvet2@xxxxxxxxx>
- Date: Fri, 02 Nov 2007 05:58:55 -0000
My Delorean wasn't getting power to the fuel pump, and I replaced the
RPM relay. Still didn't work, so I ran a new wire to the pump, and cut
the blue/white wire at the relay and soldered the pump wire. I checked,
and the pump ran. It started, I drove it out of the garage and was
putting some things back into place -- and after 3 hours I tried to
start it and it ran for a second, then quit. I checked the fuel pump
for power, there was none. I checked the pump wire at the relay, no
power. I tried to use a jumper on the relay to make it start still
wouldn't start, and I heard some clicking going on in the main & aux
relay area. Finally gave up and pushed it back in the garage and have
been searching the website for answers. Is it possible that I have a
bad ignition coil or would it be something else?
If it's the coil, could someone give me a part number where I can get
it quickly (locally)?
Thanks,
Jim
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/dmcnews/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:dmcnews-digest@xxxxxxxxxxxxxxx
mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN