[DML] Re: AC clutch running continuously

["Dave Swingle" <swingle_dmc@xxxxxxxxxxx>]

I've seen that effect - when the orifice tube was left out by a PM. But it seems strange that it will run on such a low charge. Check to see if the low pressure switch has been jumped out.

Dave S

--- In dmcnews@xxxxxxxxxxxxxxx, Kevin Heller <howdyhoho@...> wrote:
>
--After putting this
> in, the pressure gauge on the lowside is reading
> ~45psi (high on the nominal reading and low
> overcharged according to the gauge). In addition, the
> compressor never cycles and pressure reading stays
> constant at 45, all on one small can. 
> 
> Any idea why this may be? According to the service
> manual the compressor inlet screen should be checked
> for clogs. I don't recall see anything when the system
> was open, but admittedly the possibility of the inlet
> screen being clogged wasn't on my mind.
> 



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/