[DML] Re: Electrical Gremlins

["geoff_ombao" <geoff_ombao@xxxxxxxxx>]

Thanks for the info. Regarding the reverse switch, I understand it is
on the transmission. Is it very difficult to access (and replace, if
necessary)? Again, I can't seem to find any info on this in the shop
manual.

- Geoff

--- In dmcnews@xxxxxxxxxxxxxxx, "David Teitelbaum" <jtrealty@...> wrote:
>
> Go to a plumbing supply and get some of the little brushes they use to
> clean the insides of copper fittings before soldering them. After
> cleaning up the tailight boards as good as you can either solder the
> rivets to the traces or get some tiny screws and nuts to tighten up
> the rivets for better contact. Test the reverse switch with a meter.
> David Teitelbaum
> vin 10757




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/