Re: [DML] Hey need help

[Marc Levy <malevy_nj@xxxxxxxxx>]

If you have done any brake work, it is not that
difficult.  You remove the old one.  Bench bleed the
new one, install it, and bleed the lines.  Not much to
it.

Buy you replacement from one of the DMC Vendors. 
Using an off-the-shelf rebuild is a big mistake (I
know from experience).  CARDONE SUCKS!!  Steer clear
of them.


--- Carlos <carlosd32@xxxxxxxxx> wrote:

> I need to know the steps for installing a new master
> brake cylinder.
> Im going to be installing it myself and would like
> some advice before
> attempting it. 
> any advice would be helpful 
> thanks
> 
> 



       
____________________________________________________________________________________
Moody friends. Drama queens. Your life? Nope! - their life, your story. Play Sims Stories at Yahoo! Games.
http://sims.yahoo.com/  


To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/