[DML] Re: A/C pressure readings - interpretation?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: A/C pressure readings - interpretation?
- From: "welmoedj" <joe.dalton@xxxxxxxxxx>
- Date: Tue, 24 Apr 2007 18:08:38 -0000
Hi Andy,
Today I have visited my A/C man and he dug up the information he
jotted down while changing my car's A/C to R134a.
I wrote an article "for dummies" as they call it in the IT business
which now is at his for review and comment.
I extracted the information on pressure and this should guide you
through the motions:
Check: pressurize the system at 12 Bar and leave it so for 24 hours.
Then check: using soapy water to find leaking connection/seals.
Replace orifice and suspicious seals first
Vacumize
Add the special oil from the service kit, R134a (960 gram) and fluor
(for easy detection of future leaks).
Run the engine stationary for 8-10 minutes to optimize spreading the
additions.
Test at 1500 RPM with open window (one will do).
Pressure values:
Low pressure: between 1 and 2 Bar, my car's value for reference: 1.7
Bar.
High pressure: 8 Bar.
According to what I have been told there is little difference between
the pressures of R12 and R134a, when compared under equal conditions.
R12 tends to have a lower temperature than R134a when comparing at 1
Bar. The difference is some 1 or 2 degrees Celsius, nothing to worry
about.
Remind that fluid and gas pressure increases when temperature
increases, the same goes for lower temperatures. Therefore it's hard
to compare pressure figures if outside temperature and outside air
pressure (1 Bar at sea level) are not provided.
Should you be interested in the full article I can post a copy as
soon as review has been completed and translation can be made.
Welmoed.
--- In dmcnews@xxxxxxxxxxxxxxx, Soma576@... wrote:
>
> Hi Joe,
>
> If you could get me the pressure readings, that would be extremely
helpful!
>
> I am considering just evacuating the system and filling with R12
again. Is
> that feasible? Will I need to replace a bunch of stuff to get it
work right
> again?
>
> Andy
>
> Fargo, ND
> 1982 DeLorean DMC12 VIN 11596
>
>
>
>
> ************************************** See what's free at
http://www.aol.com.
>
>
> [Non-text portions of this message have been removed]
>
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/dmcnews/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:dmcnews-digest@xxxxxxxxxxxxxxx
mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN