Re: [DML] Genuine Renault EFI Turbo engine for sale
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Genuine Renault EFI Turbo engine for sale
- From: Marc Levy <malevy_nj@xxxxxxxxx>
- Date: Mon, 23 Apr 2007 06:49:11 -0700 (PDT)
I have Turbos, and a second engine for donor parts....
if someone is interested! :)
--- Martin Gutkowski <martin@xxxxxxxxxxxxxx> wrote:
> Hi All
>
> I've decided to put the feelers out for getting rid
> of some of the rarer
> items on my shelf. I don't think I'll ever use this
> stuff because I'm
> keen to go down the 3 litre route, so it's just
> sitting there and is a
> factory 250hp drop-in engine. You'll need to do some
> plumbing of exhaust
> and intake pipework, and ideally include an
> intercooler, but no
> modifications to the car or existing components will
> be required. You'll
> also have to wire in an ecu....
>
> A known good basic 2458cc GTA V6 Turbo engine which
> I will fit a
> DeLorean crank case to.
> I will supply a brand new intake manifold and
> injector rails (worth £500
> on their own)
> An EFI bellhousing to bolt up to your existing
> transmission (this is
> almost identical apart from the ECU's trigger
> sensor)
> I have a proper EFI flywheel which I will modify in
> the same way as was
> done on twin turbo #2727
> I will supply a brand new engine management system
> that supports that
> pattern (worth £650 - $1300). This ecu will drive
> the stock ignition
> system. I will also include a new genuine flywheel
> trigger sensor.
>
> £1500 ($3000). Much of this is the cost of the ECU!
>
> What you'll need to do:
>
> 1: Fit a sump! There's little point in my buying and
> shipping one over
> from the us only to ship the engine back. I'll
> include a new gasket
> 2: Buy a set of injectors of your choice - standard
> Bosch type
> 3: Plumb in your turbo(s) and exhaust. The engine is
> externally
> identical so any existing turbo kit will bolt
> straight on (this is how I
> did #2727)
> 4: Install a throttle body of your choice.
> 5: Add in sensors required by the ECU and map up.
> The ECU comes with
> full instructions and tech support.
>
> Any questions, drop me a mail. This is a project for
> the experienced DIY-er.
>
> Martin - www.delorean.co.uk
> #1458
> #11766
> ex #4426
>
>
>
>
>
>
>
>
>
>
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/dmcnews/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:dmcnews-digest@xxxxxxxxxxxxxxx
mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN