[DML] Re: springs and shocks
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: springs and shocks
- From: "drhdmc1" <drhaney@xxxxxxxxxxxxx>
- Date: Tue, 17 Apr 2007 21:19:10 -0000
I have been running PJ Grady's set up (Front springs and gas shocks
all around) for 4-5 years. The rear shocks have three heights and my
car is a bit high in the rear as I am currently running on the top
rung. I really didn't notice how much higher it was until I compared
my car to a concours car. My car is 3/4 of an inch higher in the rear
at the top of the rear fender and about 1.5 inches lower in the
front.
The front looks really good and better than stock in my opinion it no
longer looks like its running up hill. The ride is great, and
handling is really good. However, I did notice recently that I am
getting some uneven wear in the rear tires possibly due to the shock
ride height issue above, which I am going to fix.
At the time I was replacing the original OEM springs and shocks so
anything would have been an improvement because the old shocks were
hard as a rock but I have been very happy. The ride is nice and
cornering is great.
I can put about a finger and one half between the front tire and the
fender. I never bottom out in the front and the height of the front
spoiler is not an issue.
Dan Haney
vin 3254
> I'm wondering if anyone has experience with the Eibach Springs .vs.
the
> lowered front P.J. Grady Springs. I recently put the Eibach
Springs on
> front and back with the Mid-State Delorean shocks on my Delorean.
The
> front end sits a bit lower than normal but still seems a bit high.
The
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/dmcnews/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:dmcnews-digest@xxxxxxxxxxxxxxx
mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN