RE: [DML] re brushing panels

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Nick, make sure the blending pad is 60 grit. If not you may wind up taking
grain out instead of putting it in. The brown pads I have are that and do a
good job for a small fix. I also have a sponge type pad with 60 grit that
does a good job. How much do you have to do? If it's a lot I have a flapper
wheel with 60 grit I sell.
John Hervey
www.DeLoreanAutoparts.com


 
  

-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of
Nick
Sent: Monday, February 19, 2007 3:13 AM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] re brushing panels

Hi,

I know this is something that has been discussed alot and i have 
searched the internet and the archives but i cant find a step by step 
guide for re graining which i am sure i have seen somewhere before.

Can anyone give me a run down on the process and grades of sandpaper 
etc. I have bought a blending pad from Huston some time ago, so i 
already have one of them.

The grain is in OK condition at the moment but i would like to get it 
back to new. I have the bumpers off so i presume that will make it 
alittle easier and i am aware of the 'X' problem with pressing on on 
the bonnet....

Any help would be appreciated.

Cheers,  Nick 




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/