[DML] Re: Aligning Latch Pins

["brandelorean" <brandelorean@xxxxxxxxx>]

Hey David,

Thanks for the response!

So, just to make sure I'm getting this right, the hinges should be 
square all the way around...in other words the front and back hinge 
should be at the same level...correct?  

I just want to make sure as I have a bunch of those door hing shims and 
I tried using the bunch that came out from under each hinge...but it 
looks like things shifted a bit after I reinstalled the roof support 
panel.

Then, adjust the arch with the torsion bar and strut installed?  

As it stands now, I need to realign the hinges like you said, then I'll 
have a better chance of realigning the doors.

Thanks,

Brandon
Vin 3323 






--- In dmcnews@xxxxxxxxxxxxxxx, "David Teitelbaum" <jtrealty@...> wrote:
>
> To answer you question about aligning the striker pins, aka, latch
> pins, it is not easy. The torsion bar should have been adjusted 
and........



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/